The Electric angle control valve is powered by single-phase AC 220V power supply, accepts 0-10mA DC signal, and automatically controls the opening of the valve, so as to achieve continuous adjustment of process parameters such as pressure, temperature, flow, and liquid level. It is an important link in the automatic adjustment system of the production process, and is widely used in the automatic control system of electric power, metallurgy, petroleum, chemical industry, light industry food and other industrial sectors.
Electric angle Regulating valve
The Electric angle control valve is composed of the combination of the electric actuator and the control valve after mechanical connection, assembly, debugging and initial assembly.
Electric actuators right angle control valve
The Electric angle control valve inputs the DC current signal sent by the transmitter, which is amplified by the servo amplifier to drive the actuator, generate axial thrust, and drive the action of the regulating valve, thereby causing the change of the medium flow, so as to achieve various thermal processes in the regulating system. At the same time, the actuator sends out a valve displacement signal for the servo amplifier to compare, so that the regulating valve is always kept in a position corresponding to the input signal, and the servo adjustment task is completed.
Electric right angle regulating valve
Valve core: single seat, sleeve type
Size: DN20-DN200 NPS 3/4″-8″
Pressure class: PN16-PN100 Class 150-600
Connection: Flange-FF, RF, MF, RTJ Welding-SW, BW
Flange face to face: IEC 60534
Bonnet form: Standard type: (5℃-230℃)
Heat sink type: -45℃-350℃
Low temperature extension type: -196℃–45℃, bellows seal type, thermal insulation jacket type
Gasket: Metal clip graphite gasket
This product is an angle-body control valve combined with electric actuation. The current page describes single-seat and sleeve-type trim options, with connection choices that must be matched to the piping design. Confirm the selected trim, valve materials and actuator control requirement before ordering.
Product Overview
The current page presents an electric angle control-valve configuration with single-seat or sleeve-type trim descriptions. It also lists flanged and welded connection forms; the actual connection and trim selection require product-level confirmation.
Selection Notes
Confirm the medium, pressure and temperature conditions, size, trim arrangement, valve materials, required connection, installation layout, control duty, power supply and control-interface requirement before ordering.
FAQ
Which connection should be selected?
Confirm whether the piping design requires a flanged or welded connection and provide the relevant end-connection details.
What trim information should be confirmed?
State the required single-seat or sleeve-type configuration together with the service conditions for selection review.
What electrical information is needed?
Provide the required control duty, power-supply requirement and control-interface requirement for the selected actuator.