Press-Fit Globe Valve is mainly made of Stainless steel material, and it can also be called press to connect Stop Valve. Press-fit end connections use compatible tube fittings and approved pressing tools; the connection profile and sealing elements must match the tubing system and service conditions.
Press End Connections Globe Valve
Confirm replacement-part compatibility and the permitted repair procedure for the selected valve. Whether seals, internal parts or the complete valve require replacement depends on the fault assessment and the model-specific maintenance instructions.
| no | name | material |
| 1 | Body | CF8/CF8M |
| 2 | Nut | 304/316L |
| 3 | Gasket | 304/316L |
| 4 | Seat | PTFE |
| 5 | Disc | CF8/CF8M |
| 6 | Jam nut | 304/316L |
| 7 | Stem | 304/316L |
| 8 | Gasket | PTFE |
| 9 | Bonnet | CF8/CF8M |
| 10 | seal ring | 304/316L |
| 11 | V-filler | PTFE |
| 12 | Pressing ring | 304/316L |
| 13 | Jam nut | 304/316L |
| 14 | Hand wheel | QT400-15 |
| 15 | Nut | 304 |
Confirm replacement-part compatibility and the permitted repair procedure for the selected valve. Whether seals, internal parts or the complete valve require replacement depends on the fault assessment and the model-specific maintenance instructions. A conventional two-port globe valve is not a tee fitting; branch connections require separately designed piping components.
Stainless steel pipes are more and more widely used in domestic water supply and industrial pipeline engineering, and the products are diversified. Valves are an indispensable shut-off valve in the pipeline. In the construction of stainless steel thin-wall pipes, the most commonly used connection methods are single clamping, double clamping, ring pressing and welding. To connect pipe fittings such as single clamp pressure, double clamp pressure and ring pressure with the valve, it is necessary to add some pipe fittings with wires or flanges to connect with the valve (welding is not required). In this way, their installation cost will increase. If the valve has sealing problems during use, the whole valve or the whole pipe can only be replaced.
Press-Fit Stop Valve
As a long-term used item, the sealing effect of the valve will be worse and worse due to aging, wear and other reasons. The poor sealing effect will lead to the problem that the valve is not closed tightly or even leaks. Therefore, the whole valve can only be replaced during maintenance. The cost is high. Since the pipeline has been laid and there are pipes at both ends of the valve, the replacement of the valve will involve the moving of the inlet and outlet pipes, and the replacement of the valve will increase the difficulty, The maintenance intensity of workers is high.
In view of the problems existing in the above existing technologies, the company specially introduces a new practical multi-functional environmental protection valve with low maintenance cost and simple replacement.
press to connect Globe Valve
Press End Connections outer diameter
| A series of | size | Second series | 15.9*0.8 | German | 18*1 |
| A series of | 16*1 | Second series | 22.2*1 | German | 22*1.2 |
| A series of | 20*1.2 | Second series | 28.6*1 | German | 28*1.2 |
| A series of | 25.4*1.2 | Second series | 34*1.2 | German | 35*1.5 |
| A series of | 32*1.5 | Second series | 42.7*1.2 | German | 42*1.5 |
| A series of | 40*1.5 | Second series | 48.6*1.2 | German | 54*1.5 |
| A series of | 50.8*1.5 | Second series | 76.1*2 | special | 60.3*1.5 |
| A series of | 76.1*2 | Second series | 88.9*2 | special | 63.5*1.5 |
| A series of | 88.9*2 | Second series | 108*2 | ||
| A series of | 101.6*2 |
press to connect Stop Valve
Welding, single clamping, double clamping, ring pressing, outer wire, inner wire, union, flange, etc. Can be customized according to customer requirements.
| sies | L | D1 | D2 | H |
| 1/2″ | 60mm | 15.9mm | 13.7mm | 90mm |
| 3/4″ | 60mm | 22.5mm | 17.4mm | 90mm |
| 1″ | 60mm | 29mm | 25mm | 120mm |
| 1 1/4″ | 70mm | 34.5mm | 31mm | 130mm |
| 1 1/2″ | 80mm | 43mm | 39mm | 140mm |
| 2″ | 100mm | 49mm | 46mm | 150mm |
| 2 1/2″ | 120mm | 71.1mm | 65mm | 180mm |
| 3″ | 130mm | 84mm | 79mm | 185mm |
| 4″ | 180mm | 103mm | 96mm | 215mm |
This product is a stainless-steel press-fit globe/stop valve. The current page lists press-end connection options including single press, double press and ring pressing, together with a CF8/CF8M body-material table. Confirm the selected pipe specification, connection configuration and service conditions before ordering.
Product Overview
The current page presents a press-to-connect globe/stop-valve configuration for pipeline installation and lists several press-end connection options. Its material table includes CF8/CF8M body entries; confirm the final material and connection configuration for the order.
Selection Notes
Confirm pipe specification and outer diameter, selected press-end configuration, medium, pressure and temperature conditions, size, body and trim materials, flow direction, shutoff or throttling requirement, installation arrangement and operating conditions before ordering.
FAQ
What pipe information is required for a press-fit globe valve?
Confirm the pipe specification, outside diameter, wall arrangement and compatibility with the selected press-end connection before ordering.
Which press-end configurations are shown on the current page?
The page lists single press, double press and ring-pressing wording. Confirm the exact connection configuration required for the project.
Which material-table entries should be checked for a press-fit order?
The current material table includes CF8/CF8M body entries. Confirm the selected materials for the medium and operating conditions.
Related Information
https://www.trekre.com/globe-valve/
https://www.trekre.com/globe-valve/jis-20k-flanged-globe-valve/
https://www.trekre.com/globe-valve/class-300-globe-valve/
https://www.trekre.com/resources/valve-technical-knowledge/
https://www.trekre.com/about-us/